Go to content
Minelab Vanquish Faint Signals
Paul Cee Metal Detecting
Published by Paul Cee in Minelab Vanquish · Thursday 16 Jul 2020
Tags: MinelabVanquish540fainttonesfalsesignalmetaldetecting
metal detecting silverMinelab Vanquish beach metal detecting, listening for very faint signals which can mean small items buried at depth, these are the best tones to listen for when metal detecting wet sand, You have to make sure you have the SENSITIVITY Set CORRECTLY on the Minelab Vanquish, so you can actually hear the quiet tones and not falsing as you swing the coil over the beach, do you have the sensitivity set to high on your detector?.

With the Minelab Vanquish having only 5 tones you have to listen to the tones much more carefully as they can be scratchy and jump signals, have a liten to the signal from the Ring, if your metal detector is falsing alot you could easily miss this this target at depth. This was using a faster recovery speed on the Vanquish 540

#MinelabVANQUISH #MinelabDETEXPERT #metaldetectors


There are no reviews yet.
0
0
0
0
0
Enter your rating:
Copyright 2024
Back to content