Other detectors

Garrett Seahunter Mk2 best settings

Garrett Sea Hunter Mk2 threshold and discrimination knobs with a sand scoopIts not too often I'll write a "how to piece" on setting up a metal detector as everyone has their own preferences, although every time i do get asked when im out people often comment "You use Discrimination?"

Well when i use the either the Garrett Seahunter MkII or the Garrett ATX, yes they both have a somewhat crude form of discrimination even though they are Pulse Induction metal Detectors.

The Garrett Seahunter Mk has the discrimination knob on the rear of the control panel

Close-up of the Garrett Sea Hunter Mk2 threshold dial held between finger and thumb
Threshold dial on the rear control panel

Along with the ON/Off Control and also the Threshold knob.

Usually for Detecting on "Wet" Sand I have the discrimination set at "0" and the threshold at just above audible so i can hear the tone, it is a tone and not a hum as with many detectors including my CTX3030.

Garrett seahunter threshold
Threshold set just above audible for wet sand

This is my setting for the threshold

Garrett seahunter settings For Beach Metal Detecting
Another look at the Sea Hunter 2 control settings

My Discrimination Setting for "Wet" Sand

Now the Setting for Discrimination on the Dry Sand. I use this mainly to not pick up bottle tops and Bobby/Hair pins.

It is i would say 80% ok but yes i do still did bottle tops but not as many.. I Do not turn any higher and try to loose ring pulls or tabs as this also in the range of some fine jewellery, i.e. gold... and even on my CTX 3030 I do not discriminate out those, I did everything on the beach if it sounds good, but with a PI detector it will pick up everything..

Garrett Sea Hunter Mk2 trash elimination dial set at about six
Dial at about 6 costs depth, roughly 6 to 7 inches

I Have the dial at About 6 or just slightly under... this does also Affect the depth that this will now Seek the goodies, I've found it reduces to about 6"-7" maximum, but on the dry sand where losses are usually fresh this isn't really too much of an issue..

discrete discrimination on the Garrett Seahunter
Discreet mode keeps the threshold tone without the noise

Now the Discreet Discrimination setting, is pretty handy as you hear the threshold but without all the background noise of the standard setting.

Garrett Sea Hunter Mk2 knob with standard and discrete trash elimination settings
Standard setting on wet sand to hear everything

But on the wet sand i have this on standard as to hear everything thats going on, usually on the beaches i detect its very noisy as there littered with iron.

Garrett Sea Hunter Mark II box labelled professional marine pulse discriminator
A pulse induction detector built for the beach
Front of the Garrett Sea Hunter Mark II showing the diver logo
The Sea Hunter 2 is a simple coin shooter for the beach

So there you have it, these are the best setting for me when coin shooting with the Garrett Seahunter 2. you may find them useful, or they may not work for you and where you detect. At the end of the day there arn't many controls so just have a twiddle..

Paul Cee

About the author

Paul Cee

Minelab Detexpert, field tester and Crawfords Metal Detectors ambassador. Paul posts a new detecting video most weeks and prefers the beach. The finds are younger, but old coins tend to come out in better condition.

More about Paul · Videos · YouTube