Go to content
Minelab Vanquish Sensitivity Settings
Paul Cee Metal Detecting
Published by Paul Cee in Minelab Vanquish Settings · 9 May 2020
Tags: minelabvanquishvanquish340settingsuk
paul cee uk metal detectingHow to set up Sensitivity correct on a Minelab Vanquish 340.
With the popularity of the minelab Vanquish and First time users
not knowing or struggling at making the metal detector run and detect quietly, we came up with a bite size edition of setting the sensivity up correctly.










Having the Minelab Vanquish sensitivity to high will result in lots of FALSE SIGNALS and gives the user loss of being able to find small targets as the become hidden in the mass of noise that is coming from the detector that has the sensitivity set at a too high level.
minelab vanquish SENS highminelab vanquish SENS low

To Adjust the SENSITIVITY
Swing the coil slowly over the ground and reduce the level until it becomes stable, then adjust level upwards until it sharts to chirp again, once this level is found reduce slightly to regain the quiet performance, if the detector becomes unstable in use re-adjust the sensitivity.
If you are detecting near an ELECTRIC FENCE, POWER LINES or in the vicinity of electrical interferance you may have to move away, also in the home is also a great source of electrical interferance.



There are no reviews yet.
0
0
0
0
0
Enter your rating:
Copyright 2024
Back to content